I am running a Windows 10 machine with MMTTY 1.68 under N1MM version 1.0.5327.0. Stand alone MMTTY keys the rig fine. Under N1MM, pressing a function key such as my call sign, it takes about 10 seconds to go from a steady tone to Mark/Space tones. To exit transmit I have to press ESC. Exiting N1MM doesn't close MMTTY I must use Ctrl + Alt + Del. I am using a real serial card to a Rig Blaster then to a 756 Pro III.
R
Answer by
Robert Polubinski
You are trying to use an application that has been released 6 years ago when Windows 10 wasn't even developed as an idea. This could be the cause related to your issues with the device and software.
I am running a Windows 10 machine with MMTTY 1.68 under N1MM version 1.0.5327.0. Stand alone MMTTY keys the rig fine. Under N1MM, pressing a function key such as my call sign, it takes about 10 seconds to go from a steady tone to Mark/Space tones. To exit transmit I have to press ESC. Exiting N1MM doesn't close MMTTY I must use Ctrl + Alt + Del. I am using a real serial card to a Rig Blaster then to a 756 Pro III.
You are trying to use an application that has been released 6 years ago when Windows 10 wasn't even developed as an idea. This could be the cause related to your issues with the device and software.
I strongly recommend checking the available help and documents/downloads on the official website: http://hamsoft.ca/pages/mmtty.php
You can also forward this to the developer as well, maybe he can release a patch if he sees there is traffic for his software: http://hamsoft.ca/pages/contact-support.php